Group assignment for 3D Scanning and Printing
In my fablab sindoh
3dwox DP200
1.Technology: Fused filament fabrication (FFF)
2.Type: Material extrusion
3.Year: 2017
4.Manufacturer: Sindoh
5.Manufacturer country: South Korea
This above hase test print has downloaded from Thingiverse.
We have printed object one is with out support and with support. some test is not coming good some of them are found good following are the details
Finding and observation for the test print.
1.bridging test 2mm,5mm,10mm,15mm,20mm,25mm
2.Diameter 8mm,6mm test 1mm wall is printed fine
3.stringing test-top tips is not good printed
4.scale test- Fine printed
5.support test- fine printed
6.hole test- Fine printed except 2mm
7. Degree test :-after 60 degree printing but not good one
After printing with support in normal speed the object degree band is printed good
We printed this object without support and in fill 100 % .Here are the outcomes
Bridging is not printed properly after 25 mm.Till 20 mm it is printed fine.Also the circle aftere 8mm diameter are not printed perfetly.till 5 mm printed fine.
String is not printed perfectly and charcaters also not printed perfectly.